Watch the introduction of RICHARD MILLE RM 33-02

Richard Mille Replica Watch RM 33-02 Automatique

By combining the performance of a sports watch with the elegance of a round timepiece, Richard Mille successfully merged the two opposing functions of the RM 33-02 timepiece.

With the release of the new RM 33-02, the Richard Mille brand marks a special milestone for the first automatic watch with a round case made of Carbon TPT. This version is a development of the RM 033 model originally launched in 2011 and the RM 33-01 Automatic released later in 2015.

By combining the characteristic curves of the tonneau-shaped case with the elegance of the round case, the beauty of the original wholesale watches replica is reproduced in a modern and sophisticated way. Everyone created a new, extremely sporty look.

The case size is 41.70 x 8.80 mm, with a three-layer structure. The front and back of the carbon fiber TPT and the central part of the 5N red gold are made of sand.

Carbon TPT is a unique facing material, which is obtained by automatically changing the direction of the weft between the layers, so that hundreds of carbon thin layers (0.03mm) are stacked on each other, each layer has deviations. 45 degrees (you can read more about Richard Mille’s high-tech materials for fashion replica watches here). In addition, Carbon TPT is hard and almost indestructible, and is known for its ability to limit microcracks and wear. The unique lines of Carbon TPT and the distinctive lines of the case reflect the sporting characteristics of this watch.

The 3-layer structure is assembled by 14 spline screws, which are made of grade 5 titanium and wear-resistant rings made of 316L stainless steel. In addition, the wiring harness has been integrated into the housing torque screw system. Thanks to 2 nitrile O-ring rubber seals, the watch is waterproof to 30 meters.

The design of the strap has been modified with two dents positioned at 6 o’clock and 12 o’clock to bring movement to the case.

The RM 33-02 is powered by a movement called the movement RMXP1, which has a bare design of grade 5 titanium alloy and has a 45-hour power reserve. The movement is modified by a “non-circular” balance wheel that swings at 21,600 vph, driven by a platinum eccentric micro-rotor. This design allows the movement to reduce the total thickness to 2.60 mm. In addition, the watch movement also uses a variety of surface treatment techniques, such as brushing, sanding and polishing. All products are handmade to strict standards.

The large 5N gold hour markers are fixed on two hard titanium rails between the flange and the movement to ensure excellent readability.

By combining the performance of a sports watch with the elegance of a round timepiece, fake Richard Mille successfully incorporated two opposite functions into the RM 33-02 watch.